Browse Source

whyred: wifi: Update wifi configs from MIUI 9.3.25

Change-Id: I55ab0e86f40d58d5e7dd42736a2a41889b0c5ae2
tags/20190731-pie-lineage
GuaiYiHu 6 months ago
parent
commit
af630f77d2
No account linked to committer's email address
7 changed files with 8 additions and 1062 deletions
  1. 0
    4
      device.mk
  2. 8
    6
      wifi/WCNSS_qcom_cfg.ini
  3. 0
    3
      wifi/hostapd.accept
  4. 0
    1043
      wifi/hostapd.conf
  5. 0
    2
      wifi/hostapd.deny
  6. 0
    1
      wifi/p2p_supplicant_overlay.conf
  7. 0
    3
      wifi/wifi_concurrency_cfg.txt

+ 0
- 4
device.mk View File

@@ -447,11 +447,7 @@ PRODUCT_PACKAGES += \
wpa_supplicant.conf

PRODUCT_COPY_FILES += \
$(LOCAL_PATH)/wifi/hostapd.accept:$(TARGET_COPY_OUT_VENDOR)/etc/hostapd/hostapd.accept \
$(LOCAL_PATH)/wifi/hostapd.conf:$(TARGET_COPY_OUT_VENDOR)/etc/hostapd/hostapd_default.conf \
$(LOCAL_PATH)/wifi/hostapd.deny:$(TARGET_COPY_OUT_VENDOR)/etc/hostapd/hostapd.deny \
$(LOCAL_PATH)/wifi/p2p_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/p2p_supplicant_overlay.conf \
$(LOCAL_PATH)/wifi/wifi_concurrency_cfg.txt:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wifi_concurrency_cfg.txt \
$(LOCAL_PATH)/wifi/wpa_supplicant_overlay.conf:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/wpa_supplicant_overlay.conf \
$(LOCAL_PATH)/wifi/WCNSS_qcom_cfg.ini:$(TARGET_COPY_OUT_VENDOR)/etc/wifi/WCNSS_qcom_cfg.ini


+ 8
- 6
wifi/WCNSS_qcom_cfg.ini View File

@@ -96,7 +96,13 @@ FastRoamEnabled=1
# terms of RSSI. Checking is disabled if set to Zero.Otherwise it will
# use this value as to how better the RSSI of the new/roamable AP should
# be for roaming
RoamRssiDiff=3
RoamRssiDiff=5

#After consecutive number of beacons missed as configured by gRoamBmissFirstBcnt,
#the system stays alive (no power collapse) to receive beacons until final BMISS
#(consecutive number of beacons missed as configured by gRoamBmissFinalBcnt)
gRoamBmissFirstBcnt=15
gRoamBmissFinalBcnt=25

# To enable, set gRoamIntraBand=1 (Roaming within band)
# To disable, set gRoamIntraBand=0 (Roaming across band)
@@ -224,7 +230,7 @@ gMaxMediumTime = 6000
gRrmEnable=1

#Enable Power Save offload
gEnablePowerSaveOffload=1
gEnablePowerSaveOffload=2

#Enable firmware uart print
gEnablefwprint=0
@@ -435,9 +441,6 @@ ght_mpdu_density=4
# 1 - enable 0 - disable(default)
gEnableFlowSteering=1

#set get linklayer status support
gEnableLLStats=1

################ Datapath feature set End ################

################ NAN feature set start ###################
@@ -446,7 +449,6 @@ gEnableLLStats=1
# 1 - enable 0 - disable(default)
gEnableNanSupport=1
################ NAN feature set end #####################

# Enable Packet filters before going into suspend
# will clear those when resume
# bit-0 : drop MAC multicast and IPv4 multicast

+ 0
- 3
wifi/hostapd.accept View File

@@ -1,3 +0,0 @@
# List of MAC addresses that are allowed to authenticate (IEEE 802.11)
# with the AP. Optional VLAN ID can be assigned for clients based on the
# MAC address if dynamic VLANs (hostapd.conf dynamic_vlan option) are used.

+ 0
- 1043
wifi/hostapd.conf
File diff suppressed because it is too large
View File


+ 0
- 2
wifi/hostapd.deny View File

@@ -1,2 +0,0 @@
# List of MAC addresses that are not allowed to authenticate (IEEE 802.11)
# with the AP.

+ 0
- 1
wifi/p2p_supplicant_overlay.conf View File

@@ -1,4 +1,3 @@
disable_scan_offload=1
p2p_no_group_iface=1
persistent_reconnect=1
p2p_go_intent=15

+ 0
- 3
wifi/wifi_concurrency_cfg.txt View File

@@ -1,3 +0,0 @@
ENABLE_STA_SAP_CONCURRENCY:1
SAP_INTERFACE_NAME:softap0
SAP_CHANNEL:6

Loading…
Cancel
Save